Ultrasonic Grain Fertilizer Linear Vibrating Sieve Sifter

Ultrasonic Grain Fertilizer Linear Vibrating Sieve Sifter

Linear Vibrating Sieve Introduction

Linear Vibrating Sieve vibration motor excitation as the source of vibration,so that the material was tossed in the sieve,while forward in a straight line material evenly into the screening machine feeder feed port,multi-layer mesh specifications of sieve,sieve material,respectively,discharged from their exports.With low power consumption,high yield, simple structure,easy maintenance,fully enclosed structure,no dust,automatic nesting,more suitable for pipeline operations.

Appliction of Linear Vibrating Sieve

Important Information About Linear Vibrating Sieve

Working Principle of Linear Vibrating Sieve

  The linear vibrating screen is driven by dual vibrating motors. When the two vibration motors do synchronized and reversed rotation, the vibration force generated by its eccentric block offset each other parallel to the direction of the motor spindle, superimposing as a resultant force perpendicular to the direction of the motor shaft, thus the movement trajectory of the screening machine is a straight line.

  The two motor shafts have an angle of dip in the vertical direction relative to the screen surface. Under the combined effect of vibration force and material self-gravity, materials in the screen surface do jumping movement, so as to achieve the purpose of screening and grading materials. It can be used to realize automatic operation in the assembly line.

Structure of Linear Vibrating Sieve

The rectangular vibrating separator is mainly composed of screen box, sieve mesh, vibration motor, motor pedestal, damping spring and brackets.

1. Screen box: welded by steel plate, with certain strength and rigidity, it is the main component of screen machine.
2. Screen Mesh: the screen mesh is perforated plate. The overall stiffness is good, solid and reliable.

3. Vibration motor: the vibration motor use and maintenance method to see the vibration motor operating instructions.

4. Motor pedestal: the motor pedestal of the down vibration type of sieve machine (the motor is installed under the sieve box) can be moved. The connecting screw must be tightened before using, Especially the new screening machine must be repeatedly tightened three days before trial, so as to avoid accidents caused by loosening.
5. Vibration damping spring: to prevent vibration from passing to the ground and support the full weight of the screen box. When installing, the spring must be perpendicular to the ground.
6. Bracket: the bracket is used to support the screen box. It must be mounted perpendicular to the ground during installation. The bracket and sieve body part shall be joined by the compression spring.

Technical Parameters of Linear Vibrating Sieve

                   Plastic Grain Separator                                Washing Powder Separator

                        Single Layer                                                              Multi-layer

                                                         New Type Spring Separator

Description of Ultrasonic System:
  Ultrasonic system is a major change in screening technology, making it easy to screen difficult-to-screen materials, and truly solve the screening problems such as blocking meshes caused by agglomeration, static electricity, strong adsorption and irregular particle shape. It greatly improves the screening efficiency and greatly extended the screen service life. It can be widely used in abrasives, pharmaceuticals, powder metallurgy, battery materials, chemicals, non-mining, food and other industries that require fine screening.
  This kind of machine is superimposed on the low-frequency vibration of the AAREAL brand vibrating screen machine with ultrasonic high-frequency vibration directly acting on the screen.
  The ultrasonic system is composed of ultrasonic power source, ultrasonic transducer, energy conducting ring, connecting rod and connecting wire (see the figure below). The ultrasonic transducer and connecting rod are fixed together by screws, and the connecting rod is welded to the energy conducting ring. At the same time, the energy conducting ring and the connecting rod together with the screen and the screen fixing ring form an ultrasonic screen frame. The ultrasonic transducer converts electrical energy into high-frequency mechanical energy, which is transmitted to the entire screen surface through the energy conducting ring, so that the powder particles larger than the mesh bounce and remain suspended, effectively preventing the powder particles larger than the mesh from blocking the mesh. Therefore, it can improve screening efficiency, shorten screening time and improve product quality.

Contact: Ms. Magie

E-mail: sale@aarealmachine.com

             magiecn@gmail.com

WhatsApp/WeChat: 0086-15637361027

Website: https://www.aarealmachine.com