|Place of Origin:||China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Plywood wooden case (fumigation-free) for export|
|Delivery Time:||20~30 work days after order confirmed|
|Payment Terms:||L/C, T/T|
|Supply Ability:||20 sets per month|
|Cylinder Number:||Single One Cylinder Or Roller Or Tube||Advantages:||High Vibration Intensity, High Milling Efficiency, Low Power Consumption, Low Noise, Compact Structure, Convenient Installation And Maintenance Etc.|
|Structural Composition:||Vibrating Motor, Body, Chassis, Grinding Cylinder, Liner, Grinding Medium And Elastic Support Etc.||Grinding Medium:||Dielectric Rod, Dielectric Ball|
|Linear:||Manganese Steel, Ceramics, Polyurethane, Stainless Steel||Power Source:||Double Vibrating Motors|
|Purpose:||For Grinding Fine And Ultra-fine Powder||Application:||Mineral Processing, Building Materials, Abrasive Materials, Powder Metallurgy, Electric Power, Ceramics, Refractory Materials, Magnetic Materials, Chemicals, Food And Other Industries|
raymond grinding mill,
grinding mill machine
Nano Zinc Powder Horizontal Ball Mill High Vibration Laboratory Ball Mill
Introduction of Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use:
The Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use is an high efficiency grinding equipment in grinding fine and super-fine powder material,it is of high efficiency and low energy consumption,the structure is reasonable and compact, the machine is easy to install and maintain.it is widely popular with customers.
Structure of Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use:
The energy-saving single cylinder vibration mill for grinding powder is mainly composed of vibrating motor, body, chassis, grinding cylinder, liner, grinding medium and elastic support etc.
1. Chassis: lifting the body by elastic support.
2. Vibrating motor: providing energy for the vibration grinding of the mill. The vibrating motor has two sets of eccentric blocks, and the eccentric blocks on both sides rotate in the same direction, so that the required exciting force tick marks are aligned with the datum line of the shaft end.
3. Grinding medium: it is the grinding main body of the mill, which is used for impact grinding of materials.
4. Elastic support: installed on four fulcrums, each fulcrum has two springs, the main function is to make the mill body in an elastic state, and basically isolate the vibration impact on the base when the body vibrates, thereby reducing the dynamic load transferred by the mill to the foundation. In order to keep the mill in good working condition, the gasket can be adjusted under the spring support, which is used to solve the installation problem of the levelness of the grinding body (cylinder). Each set of springs must ensure the coaxiality of the upper and lower contact surfaces of the spring during the installation process, and the tolerance shall not exceed 2mm.
5. Grinding cylinder housing: It is the working body of the vibration mill, which is used to hold the grinding medium and the grinding material. The grinding cylinder housing is composed of a grinding cylinder, and the grinding cylinder is equipped with a wear-resistant lining cylinder. When the lining cylinder is ground and damaged, it can be removed and replaced.
6. Lining cylinder: it is closely attached to the inner wall of the grinding cylinder to protect the grinding cylinder. When the material is vibrated in the grinding cylinder, the inner wall of the grinding cylinder is also greatly worn at the same time, and the liner which is easy to replace in the grinding cylinder can improve the service life of the whole machine.
Technical Parameters of Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use:
Cylinder Volume (L)
|Feeding Particle Size (mm)||Discharge Particle Size (mm)||Vibration Frequency (r/min)||Working Amplitude (mm)|
Advantages of Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use:
1. Closed milling system, no dust emission, no pollution.
2. Easy installment and maintenance.
3. Low energy consumption and low production cost.
4. Simple production process and high efficiency.
5. Perfect electrical control function, very convenient for switching system.
Application of Nano-zinc Powder Vibration Ball Mill Grinding Equipment for Laboratory Use:
The single roller vibrating mill has a wide range of application. It can be widely used in grinding materials of powder metallurgy, electric, ceramic, mineral, building materials, refractory, magnetic material, Chemical, food, and other industries.
Contact Person: Ms. Magie
Feeding Particle Size: 0~25mm
Drive Device: general motor + vibration exciter
Grinding Method: dry method, wet method, open circuit, closed circuit
Structural Composition: chassis, body bracket, soundproof cover, machine body, grinding cylinder, vibration exciter, lining plate, elastic support, grinding medium and drive motor
Advantages: three-dimensional structure, small footprint, uniform powder fineness, stable transmission and reliable operation
Finished Product Size: 50 mesh ~325 mesh
Structural Composition: main body, analysis machine, fan, cyclone separator, dust collector and pipeline
Structural Features: three-dimensional structure, simple, cover a small area, strong ability matched with complete sets of equipment
Cylinder Number: single one cylinder
Structural Composition: vibrating motor, body, chassis, grinding cylinder, liner, grinding medium and elastic support etc.
Purpose: for grinding fine and ultra-fine powder
Advantages: high vibration intensity, high milling efficiency, low power consumption, low noise, compact structure, convenient installation and maintenance etc.
Structural Composition: a base frame support cylinder, a grinding cylinder, a lining plate, a grinding medium, a vibration exciter, a support spring, a drive motor etc.
Grinding Medium: ceramic ball, stainless steel ball, manganses steel ball, manganese steel rod
Grinding Lining: rigid manganese steel lining, ceramic lining, polyurethane lining