AT200tap Rotap Test Sieve Shaker For Silica Sand Laboratory Particle Size Analysis

Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis

Overview of Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​:
  Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​ (synchronous belt type) made by AAREAL company is in accordance with international products. The working parameters meet the national standards. With test sieve and sample sieve, it can be used for metallurgy, chemical industry, abrasive, super hard materials, feed, food, medicine and other industries screening production and inspection of the powder materials.

  The AT200tap rotap test sieve shaker can be equipped with sound-proof cover or shield according to the requirement.

Application of Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​:

  Our AT200tap rotap test sieve shaker can be used in diamond and other materials of high value, requiring accurate screening of the abrasive industry. This kind of sieve shaker is widely used in metallurgy, powder, chemical, pharmaceutical, building materials, geology, feed, defense and other departments of scientific research and production, laboratory, and quality inspection room, for particle and powdery materials granular structure and sundries amount of standard screening, filtering and inspection sieve test. The device is equipped with timing device to ensure the accuracy and repeatability of the user test results.

Working Principle of Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​:

  The motor drives the gear speed change through the synchronous belt, making the main shaft rotate. And then the main shaft drives the eccentric wheel to make the slide plate drive the test sieve shake left and right. At the same time, it drives the top gear rotate, strike the hammer and slap the test sieve, making materials in the test sieve and sample sieve screen layer by layer. So people can accurately obtain the materials of multiple particle size ranges at the same time, achieving accurate and rapid screening purposes.

Features of Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​:

1. The reproducibility of the test result is good.

2. Simple operation, free of refueling, clean, hygienic and convenient.

3. It can be equipped with 200mm or 205mm sieves, 1~8 layers.

4. Complete synchronous belt conduction power, quick and easy maintenance.

5. Selection of high quality accessories, reasonable structure, low failure rate.

6. Accurate transmission, good consistency.

7. Long life and low maintenance cost.

8. Sound protecting cover can be installed to avoid noise.

9. High screening efficiency.

10. Clean.

Technical Parameters of Rotap Test Sieve Shaker for Silica Sand Laboratory Particle Size Analysis​:

1. This machine is running intermittently. This machine is a intermittent running and 8-hour single-shift operating laboratory equipment.

2. The screen frame of this machine is selected to meet GB/T 6003.1-1997 standard.

3. Motor Power: 0.18KW

4. Number of Revolution: 290±6 times/min

5. Tapping Times: 156±3 times/min

6. Tapping Height: 38±6mm

7. Rotation Distance: 25mm

8. Power Supply: 220V/50HZ or 220V/60HZ