Only The Mesh Vibrates, The Screen Box Does Not Vibrate
Function:
Grading, Screening, Dewatering And Desilting Of Fine Materials
Control Box:
Included
Vibration Intensity:
8~10g
Dip Angle:
20°~45°, And The Angle Is Adjustable
Screen Vibration Amplitude:
1~3mm
Characteristics:
Minimal Dynamic Load, Small Footprint, Safe To Use, Easy To Maintain Etc.
Application:
Sugar, Salt, Frac Sand, Fertilizer Etc.
Screen Width:
1~2m
Screen Length:
1.5~6 M
Mesh Size:
0.07~10mm
Layers Of Screen:
1~4 Layers
Power Source:
Electromagnetic Vibrators Or Unbalanced Motors Etc.
Highlight:
Screen Silica Sand High Frequency Screen
,
Adjustable high frequency vibrating screen
,
Electromagnetic high frequency vibrating screen
A New Choice for Screening Silica Sand – High Frequency Screen
When screening Medium-fine particles of silica sand, frac sand etc., people often choose to use a gyratory screen because of its large screening capacity and high screening accuracy.
However, a single unit of gyratory sifter sometimes can not meet the customer’s screening needs of larger capacity, such as 20 tons/hour, 30 tons/hour etc. Now AAREAL provide a new choice for screening silica sand, that is, High Frequency Screen, which is also called vibrating wire screens, or screening machines with direct excitation of the screening mesh by some user.
Take the quartz sand project with a daily capacity of 2000 tons as an example. The required capacity is about 85~90 tons/hour. If use a 2000*3600mm Compound Gyratory Sifter, the single unit capacity is about 10~15 tons/hour, then the user may need 8~9 units to achieve the required capacity. If use our high frequency screen, one unit can complete 25~35 tons/hour, and the user only needs 3 units to get 85~90 tons/hour capacity, which saves much cost, not only cost for screening machines, but also for peripheral supporting equipments such as belt conveyor, bucket elevator, screw conveyor etc..
The screen box of our high frequency screen does not vibrate, only the screen surface vibrates. This kind of screening machine uses unbalance motors or electromagnetic vibrating heads to clean the screen mesh. When screening Medium-fine Particles, we can use unbalance motors in the upper screen decks to provide the necessary vibration amplitude to efficiently mix medium to fine grains, and use electromagnetic vibrating heads in the lower screen decks to provide the necessary acceleration for deagglomeration of fine to very fine grains. Both drives have cyclically adjustable cleaning functions, which support a permanent keeping free of screen cloths even with difficult material.
Our high frequency screen has many Advantages compared with vibrating type screen:
1. No clogged screen mesh due to automatic and adjustable cleaning pulses.
2. Environmental protection: dustproof and low noise.
3. It adopts end-tension screen structure. The replacement of the screen is very easy.
4. Highly efficient vibration transmission and low energy consumption.
5. Continuous production. Even one drive is failure, the equipment can also work.
6. Gentle screening. Only the screen vibrates, and the screen box does not vibrate. The dynamic load is extremely low.
7. Long service life due to the static screen box.
In order to feed evenly and distribute the raw materials evenly on the screen surface, we will provide your high frequency screen with a static center vibrating distributor at the feed inlet.
If you are not satisfied with your existing quartz sand screening equipments, you can consider our high frequency screen, which is a good or even a better choice for you.
Introduction of High Frequency Screen for Silica Sand:
For high frequency fine screen, the screen surface vibrates, and screen box does not move. It is used for dry and wet screening and dehydration operations of 0.07~10 mm particles.
Working Principle of High Frequency Screen for Silica Sand:
It uses electromagnetic vibrators or unbalanced motors as the power source, the high frequency vibration directly excites the screen, making the screen work in a near resonance state. The screen surface amplitude is 1~3mm, and the vibration strength is 2~4 times that of the general vibrating screen. Under the action of high-frequency vibration, the screen surface keeps the screen clean. Even difficult-to-screen materials can be screened with high efficiency and accuracy.
The installation angle can be easily adjusted at any time to adapt to different material properties and different screening operations.
Technical Parameters:
Power source: electromagnetic vibrators or unbalanced motors
Fed by a vibrating distributor, the feeding is uniform
Up to 4 layers of screens can complete the production of 2~5 products
Screen Width: 1~2 m
Screen Length: 1.5~6 m
Screen Angle: 20°~45°, and the angle is adjustable
Mesh Size: 0.07~10mm
Models:
WA(WAU WAF)-1015 1025 1035 1040
1220 1230 1240 1250
1530 1540 1550 1560
1840 1850 1860
2045 2060 2560 3060
WAW- 1230 1245 1260 1645 1660
Features:
1. High screening efficiency and large processing capacity. The capacity can be up to 20 t/h*m2.
2. The screen is free from clogging, and the screening accuracy is up to 85-95%.
3. Only the screen vibrates, and the screen box does not vibrate. The dynamic load is extremely low, and the equipment is easy to install.
4. The replacement of the screen is very simple.
5. Low driving power.
6. Environmental protection: dustproof and low noise.
WA model, use electromagnetic vibrators as the power source
WAU model, use unbalanced motors as the power source
WAF (WAUF) model, in addition to the unbalanced motors (or electromagnetic vibrators) as the power source, it is driven by two vibration motors, which can effectively reduce the height of the screening machine
WAD (WAUD) model, it can realize the simultaneous operation of two screening machines
WAW model, use vibrating motors as the power source
Your message must be between 20-3,000 characters!
