Silica Sand 2 Deck 1800*5000mm Dewatering Vibrating Screen

  1800*5000mm 2-deck Dewatering Vibrating Screen for Silica Sand with Spray System

This 2-deck Dewatering Vibrating Screen is used for Silica Sand wet screening, screen width*length 1800*5000mm. The top layer adopts 30mm woven wire mesh, and the second layer uses 2mm polyurethane sieve plate.

  The wet screening machine is equipped with a spray device on the basis of the ordinary vibrating screen in order to wash the material and make the screening more thorough.

  This wet screening machine is especially suitable for solid-liquid separation, or some super fine powder with high viscosity, and it is also suitable for individual oil separation and other industries. It is widely used in sand and stone field, ore dressing, road and bridge construction site and other occasions where the material needs to be cleaned, sieved and classified.

  AAREAL company can produce various forms of vibrating dewatering screen according to different screening requirements, such as vibration motor type, vibration exciter type etc. Welcome to send to our RFQs or talk about the screening problems if you have any.

Introduction of Dewatering Vibrating Screen for Silica Sand with Spray System:

The Vibrating Dewatering Screen Machine for Silica Sand is also called drainage screen, drainage sieve, dehydration vibrating screen, dewatering vibrating screen, vibrating dewatering screen, dehydration shaker, sculping screen, medium drainage screen, medium draining screen, sizing-medium drainage screen etc.  This kind of screening machine can choose vibration motor or exciter as vibration source.

  The dewatering screen is often used in coal preparation, ore dressing, power generation, sugar making, salt making and other industrial sectors, for medium and fine grained materials wet and dry grading, screening, dewatering, medium removal and desliming.

Working Principle of Dewatering Vibrating Screen for Silica Sand with Spray System:

  Dewatering screen adopt dual-electrode self-synchronization technology, universal eccentric block, adjustable amplitude vibrator. The machine is combined mainly by the screen box, exciter, support system and motor. The two mutually independent vibrators are respectively driven by the tape coupling to do synchronous reverse operation. The centrifugal force generated by two eccentric masses is superposed along the vibration direction and reversely counteracted, thereby forming a single vibration force along the vibration direction, making the screen box reciprocating linear motion.

  The drainage screen, also known as high-frequency dewatering screen, changing the water surface tension of pulp through the exciting force, pulp water through the screen to become the undersize material, and fine material is blocked by the screen to form the filter layer by the vibration of the forward movement of discharge. Dewatering screen is mainly used for detailings dewatering in the mineral processing industry, coal slurry dehydration of coal preparation plant, washed quartz sand dewatering and ceramic slurry dehydration, and wet and dry classification, dehydration, removal and mud removal of medium and fine granular materials in industrial sectors such as electric power, sugar making and salt making.

Characteristics of Dewatering Vibrating Screen for Silica Sand with Spray System:

1. Good dewatering effect, safe and reliable.

2. High screening capacity and efficiency.

3. Low noise, easy maintenance.

4. Reasonable structure, strong and durable.

5. It has seat type and hanging type for choice.

6. The screen has a simple structure, easy maintenance. Screen adopts high strength metal woven mesh, durable service, or uses polyurethane screen mesh.

Technical Parameters of Dewatering Vibrating Screen for Silica Sand with Spray System:

                   Vibration Exciter Type                                       Vibration Motor Type                                     

Instructions for Dewatering Vibrating Screen for Silica Sand with Spray System:

1. The dip angle of the screen surface can be adjusted from -2 to 10 degrees. Other angles can be adjusted by the user.

2. When the forced synchronization is adopted, the motor can be installed on the left or right. User must state when ordering.

3. The screen structure (weaving, punching, wedge-bar), mesh size, processing capacity, material name and feeding particle size should be indicated in the selection and ordering by the user.

4. When selecting and ordering, the user should determine the arrangement of the sieve and screen seam size. If they do not make a decision, we supply the machine according to the right-type screen seam 0.5mm arrangement. (The motor is installed on the left or right side of the material flow direction.)

Contact: Ms. Magie

E-mail: sale@aarealmachine.com

             magiecn@gmail.com

WhatsApp/WeChat: 0086-15637361027

Website: https://www.aarealmachine.com