Payment & Shipping Terms:
|Mesh Cleaning Method:||Ultrasonic System: Ultrasonic Power Supply And Transducer||Power Supply:||220V 50Hz Or 110V 60HZ|
|Working Frequency:||36KHZ||Drive Device:||One Set Of Verticle Vibrating Motor|
|Movement:||Three Dimensional Vibration||Application:||For Materials With Strong Adsorption, Easy Agglomeration, Strong Viscosity, High Static Electricity, High Density, Super Fine Powder Etc.|
linear motion vibrating screen,
vibratory screening equipment
Ultrasonic Linear Vibrating Screen Machine For Graphite
Overview of Ultrasonic Linear Vibrating Screen:
Mesh clogging is a common problem in the sieving industry and other associated services. It not only damages the device being used but also leads to reducing quality yield/output. But don’t worry, the Ultrasonic Screen Deblinding System comes to the rescue.
Ultrasonic linear vibrating screen solves the screening problem of materials with strong adsorption, easy agglomeration, strong viscosity, high static electricity, high density, super fine powder etc. The screening accuracy can be increased by 1~100%, and the output can be increased by 1~10 times, really meeting the industrialization production of 100 mesh ~500 mesh and above.
It can be installed in various kinds of screening machines, such as ultrasonic test sieve shaker, ultrasonic round separator, ultrasonic rectangular separator, ultrasonic tumbler screen, ultrasonic airflow centrifugal screen, ultrasonic gyratory screen and so on.
Working Principle of Ultrasonic Linear Vibrating Screen:
The ultrasonic vibrating screen consists of the following: the ultrasonic generator or power supply, the ultrasonic transducer, and the screen mesh with energy conduction ring.
Operation starts with the inflow of the fine powder from the feed storage or hopper to the screen mesh. To sieve the fine powder, the ultrasonic vibrating system induces vibration on the screen mesh. The transducer converts high electronic frequency into mechanical kinetic energy and supplies this ultrasonic vibration. This vibration is of high frequency and low amplitude and is then distributed evenly throughout the mesh via the energy conduction ring.
The ultrasonic vibration sieving process breaks the static bonding between particles, promotes vertical movements in the screen mesh, and increases the efficiency of the sieve.
Features of Ultrasonic Linear Vibrating Screen:
1. While achieving high accuracy and high mesh screening, control the narrow range of particle size.
2. It can be used with single layer and multi-layer. A smart ultrasonic generator can use three transducers at the same time.
3. Complete screen self-cleaning function. More than 500 mesh screening, no mesh blockage, no screening efficiency attenuation.
4. It can exactly solve the screening problems of strong adsorption, easy reunite, high electrostatic, high fine, high density and light specific gravity etc.
5. Ensure that the properties of the treated material remain unchanged.
6. The screening accuracy can be increased by 1~100%, and the output can be increased by 1~10 times.
Ultrasonic Screen Deblinding System of Ultrasonic Linear Vibrating Screen:
The core technical components of ultrasonic vibrating screen is the ultrasonic screen deblinding system, and the ultrasonic screen deblinding system is divided into ultrasonic power supply and transducer.
(1) Ultrasonic Control Power Supply:
Power: 220V,50HZ/110V, 60Hz, Single-Phase
Power Consumption: Max. 1A
Output Frequency: 36KHz
Operating Mode: Continuous Mode / Pulse Mode
(2) Ultrasonic Transducer:
The ultrasonic transducer is very important in the ultrasonic system. Different transducers have quite different prices. The ultrasonic transducers imported from Switzerland are more expensive. But the quality is very good.
There are two kinds of installation form of ultrasonic transducer. One is built-in transducer design, and the other is the external transducer design.
Ultrasonic External Transducer Ultrasonic Built-in Transducer
Square Adhesive Screen Frame Holder (for reference)
Differences in Design:
|Item Compared||External Transducer||Built-in Transducer|
|Installing Form||The external transducer is mounted outside the screen frame and the extending part is at the edge of the grid||The built-in transducer is fixed directly in the middle of the grid|
|Cleaning Method||Disassembly and cleaning are relatively convenient||When cleaning, people need to remove the screen frame, and then lift the grid to clean up|
|Applicable Materials||The external transducer does not have direct contact with the material, so it can protect the transducer effectively, improving the service life, screening accuracy and output||
The built-in transducer will contact the material during use.
For some conductive and corrosive materials, contact with the transducer will reduce the service life, and also affect the output frequency, thereby reduce the precision and output.
Contact Person: Magie