|Place of Origin:||China|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Plastic film for the machine body, and fumigation-free plywood wooden case for the spare parts such as screens etc.|
|Delivery Time:||15~35 work days after order confirmed|
|Payment Terms:||T/T, L/C|
|Supply Ability:||5 sets per month|
|Movement:||Gyratory Reciprocating Movement||Screen:||Grommet Screen, Longer Service Life|
|Screen Size:||1000*3000mm, 1500*3600mm, 1800*4000mm, 2000*5000mm Etc.||Material:||Carbon Steel, Stainless Steel, Aluminum Etc.|
|Mesh Cleaning Device:||Silicone Balls||Spare Parts:||Screens, Balls, Sealing Rubber Strip, Clips, Clamps Etc.|
|Motor:||ABB, Siemens Or Other Brands, Ordinary Or Explosion-proof Type||Application:||Quartz Sand, Silica Sand, Coated Sand, Calcium Carbonate, Urea, Sugar, Salt, Petroleum Coke, Ceramic Proppant Etc.|
Rotex Gyratory Screen Sifter,
Gyratory Rotex Screen Sifter,
1800*4000mm Gyratory Screen Sifter
Introduction of 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration is widely used in screening sugar, salt, soybean, urea, quartz sand, coconut shell activated carbon, calcined petroleum coke etc. This kind of screening machine can meet your requirement of Large Screening Capacity and High Screening Accuracy for Fine Materials. It is also known as the gyratory vibrating screen, gyratory screening machine, gyratory sifter, gyratory separator, Rotex screen, Rotex screener, gyratory screen, gyratory screener etc.
Some Important Information You May Care About 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
|Movement||gyratory reciprocating motion: circular motion at feed end, elliptical motion at center, and linear motion at discharge end|
|Electric Driver||general motor + exciter|
|Screen Decks||1~4 layers of screen available (suggest 1~3 layers)|
|Screen Size||500*1500mm, 1000*2100mm, 1000*3000mm, 1500*3000mm, 1500*3600mm, 1800*3600mm, 1800*4000mm, 2000*5000mm etc.|
|Motor Brand||Siemens, ABB, China Made Brand, or according to customer requirements|
|Spare Parts||the special screen, silicone balls, drive exciter, compensating clamps and clips etc.|
|Discharge Port||usually at the bottom of the machine, and it can also be made at the back of the machine|
|Material||aluminum, carbon steel, contact parts stainless steel (optional)|
|Installation||floor seat installation, cable suspension installation|
|Mesh Cleaning Method||Use mesh cleaning balls to clean the screen mesh. Rubber ball, silicone ball, polyurethane ball etc.|
Advantages of 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
1. Reciprocating Gyratory Motion:
Gyratory sifter with Gyratory reciprocating motion provides efficient distribution, stratification, and sifting resulting in higher yields and less rejection of good material.
2. Easy Operation:
Stable operation, high performance, reduce the screening costs.
The self-cleaning ball could avoid the mesh blocked.
3. Easy Sifter Mesh Replacing:
The mesh is fasten on the deck vis spring clamp, it is easy to change the mesh.
4. Wearable and Reliable:
High quality and wearable structure featuring abrasion and corrosion resistant stainless steel.
Working Principle of 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
The gyratory screen could spreads the material across the full width of the screen surface, the material flow thickness will be thiner than other sifting equipment. The material will be easy to be sifting becasuse thiner the flow bed.
The unique gyratory motion imparts a combination of actions to the material as it passes along the screen surface. It begins with a horizontal circular motion at the feed end, gradually diminishing along the length of the machine to an elliptical path, and finally to an approximate straight-line motion at the discharge end. There is no vertical component to this motion thus keeping the material in constant contact with the screen surface.
Stage 1 Circle stalge:
When the material fall onto the gyratory sifter deck from inlet, the material will disperse soon until the material bed cover screen mesh along the screen width.
Stage 2 Ellipticl stage:
After first stage material spreading, the material bed thickness is suitable for screening now, and the material movement path become the elliptical from circle, the most material screening and sifting work will be done in this stage.
Stage 3 Linear stage:
After first two stage sifting, the material screening work almost finished in this stage, the material movement path become linear from elliptical, the path distance will be short and the material will flow out from the gyratory sifter outlet soon.
Technical Parameters of High Accuracy Gyratory Screen Sifter Machine for Silicon Metal Powder:
|Model||Screen Surface Specification (W*L) (mm)||Screen Box Stroke (mm)||Motor||
|Rotation Rate (rpm)|
Installation of 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
1. Cable Suspension:
Gyratory screener can be cable-suspended from the four corners of the machine, thereby isolating out-of-balance screening forces from the surrounding structure. Accurate counterbalancing of the gyratory sifter makes this installation option possible. If the existing overhead structure is not suitable for cable suspension, or is structurally unable to support the cable-suspended unit, the gyratory separator can be suspended from a floor-mounted cable support cradle. As with conventional cable suspension, this option effectively isolates the horizontal out-of-balance screening forces, helping to minimize costs for new structures as well as permitting the use of older structures which might not otherwise support cable-suspended equipment.
2. Floor Mounting:
The low transmitted forces of the Rotex Screeners counterbalanced drive allow the unit to be floor mounted in properly designed structures where some other types of equipment cannot. Mounting may be directly on the floor or on an elevated structural steel framework, the elevated position permitting drums or other equipment to be located under the machine. iBulk engineers can recommend a stand for any specific application.
Cable Suspension Type Floor Mounting Type
Some Details About 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
Application of 1800*4000mm Rotex Gyratory Screen Sifter for Silica Sand for Water Filtration:
1. Metallurgy, Mining industry: aluminum powder, copper powder, ore alloy powder, welding rod powder.
2. Food industry: sugar powder, starch, salt, rice, milk powder, egg -powder, sauce, syrup.
3. Chemical industry: resin, pigment, industrial medicine, cosmetic, coatings, medicine powder, granules.
4. Medical industry: all kinds of medicine.
5. Waste treatment: disposed oil, disposed water, disposed dye waste water, active carbon.
Contact Person: Magie